|
|
|
Who's Online
There currently are 5932 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
 ;
Generally speaking good copy; a few pages too hard contrast...
Good service and communication.
;
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
;
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
;
Clear and easy to read. All details as expected. Price acceptable , and quick delivery.
Phase Switching
5.1ms
0.5m 2.25m
1 2 3 4 5
Make sure that the defeat is turned off (page 25). Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Touch [i-Personalize].
The i-Personalize screen appears.
Touch [ Touch [
] of A.PROCESSOR. ] of PHASE.
The A.PROC list screen is displayed.
The sound is uneven because the distance between the listening position and the different speakers is different. The difference in the distance between the front left and rear right speakers is 1.75 meters (68-3/4").
Time correction eliminates the difference between the time required for the sound from the different speakers to reach the listening position. Setting the time correction of the front left speaker to 5.1 ms makes it possible to coordinate the distance from the listening position to the speaker.
The PHASE adjustment screen appears.
6 7
Switch the phase (0° or 180°) by touching [ ] or [ ] of the desired speaker. Touch [RETURN] to return to the previous screen.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and centre speakers. An additional 10 bands are available for the subwoofer. This allows you to customize the sound to suit your taste.
5 6 7 8
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
Touch [i-Personalize].
The i-Personalize screen appears.
Touch [
] of A.PROCESSOR.
1 2 3 4 5
Check that the Defeat mode is off. Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
The A.PROC list screen is displayed.
Touch [i-Personalize].
The i-Personalize screen will appear.
Touch [ ] or [ ] of T.CORR.
Select L/R or L+R.
L/R: Different adjustment values can be set for the left and right channels.
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
L+R: Sets the same adjustment values for the left and right channels.
Select L/R or L+R by touching [ ] or [ ] of G-EQ.
Different adjustment values can be set for the left and right channels. L+R: Sets the same adjustment values for the left and right channels. L/R:
9
Touch [
] of T.CORR.
The T.CORR adjustment screen appears.
10 Adjust the time correction value (0.0 - 20.0ms) of a
desired speaker by touching the respective [ ] or [ ] button (1 step = 0.05ms).
When parametric EQ is adjusted, this setting will be turned off.
6 7
Touch [ Touch [
] of G-EQ. ] of the desired speaker (channel).
11 Touch [RETURN] to return to the previous screen.
� When the speaker is set to the �OFF� mode, the TCR for that speaker cannot be set. Refer to �Setting the Speakers� (page 47). � The adjustment value for FRONT 2 (speakers) which is adjusted in time correction, is also applied to the front speakers in �Setting Bass Focus� (page 51). � The adjustment (AUTO TCR) cannot be automatically set on this unit.
The G-EQ list screen appears.
The G-EQ adjustment screen appears.
49-EN
|
|
|
> |
|
