This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 50 (click to view)
Phase Switching
5.1ms
0.5m 2.25m
1 2 3 4 5
Make sure that the defeat is turned off (page 25). Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Touch [i-Personalize].
The i-Personalize screen appears.
Touch [ Touch [
] of A.PROCESSOR. ] of PHASE.
The A.PROC list screen is displayed.
The sound is uneven because the distance between the listening position and the different speakers is different. The difference in the distance between the front left and rear right speakers is 1.75 meters (68-3/4").
Time correction eliminates the difference between the time required for the sound from the different speakers to reach the listening position. Setting the time correction of the front left speaker to 5.1 ms makes it possible to coordinate the distance from the listening position to the speaker.
The PHASE adjustment screen appears.
6 7
Switch the phase (0° or 180°) by touching [ ] or [ ] of the desired speaker. Touch [RETURN] to return to the previous screen.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and centre speakers. An additional 10 bands are available for the subwoofer. This allows you to customize the sound to suit your taste.
5 6 7 8
Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
Touch [i-Personalize].
The i-Personalize screen appears.
Touch [
] of A.PROCESSOR.
1 2 3 4 5
Check that the Defeat mode is off. Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
The A.PROC list screen is displayed.
Touch [i-Personalize].
The i-Personalize screen will appear.
Touch [ ] or [ ] of T.CORR.
Select L/R or L+R.
L/R: Different adjustment values can be set for the left and right channels.
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
L+R: Sets the same adjustment values for the left and right channels.
Select L/R or L+R by touching [ ] or [ ] of G-EQ.
Different adjustment values can be set for the left and right channels. L+R: Sets the same adjustment values for the left and right channels. L/R:
9
Touch [
] of T.CORR.
The T.CORR adjustment screen appears.
10 Adjust the time correction value (0.0 - 20.0ms) of a
desired speaker by touching the respective [ ] or [ ] button (1 step = 0.05ms).
When parametric EQ is adjusted, this setting will be turned off.
6 7
Touch [ Touch [
] of G-EQ. ] of the desired speaker (channel).
11 Touch [RETURN] to return to the previous screen.
� When the speaker is set to the �OFF� mode, the TCR for that speaker cannot be set. Refer to �Setting the Speakers� (page 47). � The adjustment value for FRONT 2 (speakers) which is adjusted in time correction, is also applied to the front speakers in �Setting Bass Focus� (page 51). � The adjustment (AUTO TCR) cannot be automatically set on this unit.
